Mechanics of Solids (about journal) Mechanics of Solids
A Journal of Russian Academy of Sciences
 Founded
in January 1966
Issued 6 times a year
Print ISSN 0025-6544
Online ISSN 1934-7936

Russian Russian English English About Journal | Issues | Guidelines | Editorial Board | Contact Us
 


IssuesArchive of Issues2022-3pp.482-495

Archive of Issues

Total articles in the database: 12854
In Russian (Èçâ. ÐÀÍ. ÌÒÒ): 8044
In English (Mech. Solids): 4810

<< Previous article | Volume 57, Issue 3 / 2022 | Next article >>
A.F. Akhmetgaleev, A.M. Lokoshchenko, and L.V. Fomin, "Steady-State Creep of a Long Narrow Rectangular Membrane Inside a Low Rigid Matrix with a Proportional Dependence of the Magnitude of the Transverse Pressure on Time," Mech. Solids. 57 (3), 482-495 (2022)
Year 2022 Volume 57 Number 3 Pages 482-495
DOI 10.3103/S0025654422030013
Title Steady-State Creep of a Long Narrow Rectangular Membrane Inside a Low Rigid Matrix with a Proportional Dependence of the Magnitude of the Transverse Pressure on Time
Author(s) A.F. Akhmetgaleev (Institute of Mechanics, Lomonosov Moscow State University, Moscow, 119192 Russia, achmet206a@yandex.ru)
A.M. Lokoshchenko (Institute of Mechanics, Lomonosov Moscow State University, Moscow, 119192 Russia, loko@imec.msu.ru)
L.V. Fomin (Institute of Mechanics, Lomonosov Moscow State University, Moscow, 119192 Russia; Samara State Technical University, Samara, 443100 Russia, fleonid1975@mail.ru)
Abstract The problem of steady-state creep of a long narrow rectangular membrane under constrained conditions inside a rigid matrix with a proportional increase in the transverse pressure with time (at different velocities) is studied. The problem is solved taking into account the geometric and physical nonlinearity. The problem considers a long rigid matrix of rectangular cross section, in which the height is not more than half the width. Two variants of the contact conditions between the membrane and the matrix are considered: ideal slip and sticking. In this work, three stages of membrane creep are studied. At the first stage, the membrane is deformed under steady-state creep conditions up to the moment it touches the transverse wall of the matrix. The second stage ends at the moment the membrane touches the longitudinal walls of the matrix. At the third stage, the membrane is in contact with the matrix along the transverse and longitudinal sides. The calculation is carried out until the time of almost complete adherence of the membrane to the matrix. It is of interest to compare these times under different contact conditions. In the general case, the ratio of these times depends on two parameters: the exponent in the constitutive equation of the steady-state creep of the membrane material and the value of the dimensionless height of the matrix. In this problem, at different rates of increase in the transverse pressure and at different degrees of proximity of the membrane to the matrix, the times of completion of loading stages in ideal slip are shorter than in adhesion. The research results can be used in calculations of membrane formation in a rigid matrix.
Keywords long narrow membrane, steady creep, low rigid matrix, transverse pressure, perfect glide, adhesion
Received 04 March 2021Revised 09 April 2021Accepted 24 May 2021
Link to Fulltext
<< Previous article | Volume 57, Issue 3 / 2022 | Next article >>
Orphus SystemIf you find a misprint on a webpage, please help us correct it promptly - just highlight and press Ctrl+Enter

101 Vernadsky Avenue, Bldg 1, Room 246, 119526 Moscow, Russia (+7 495) 434-3538 mechsol@ipmnet.ru https://mtt.ipmnet.ru
Founders: Russian Academy of Sciences, Ishlinsky Institute for Problems in Mechanics RAS
© Mechanics of Solids
webmaster
Rambler's Top100