Mechanics of Solids (about journal) Mechanics of Solids
A Journal of Russian Academy of Sciences
 Founded
in January 1966
Issued 6 times a year
Print ISSN 0025-6544
Online ISSN 1934-7936

Russian Russian English English About Journal | Issues | Guidelines | Editorial Board | Contact Us
 


IssuesArchive of Issues2024-4pp.2617-2627

Archive of Issues

Total articles in the database: 12949
In Russian (Èçâ. ÐÀÍ. ÌÒÒ): 8096
In English (Mech. Solids): 4853

<< Previous article | Volume 59, Issue 4 / 2024 | Next article >>
Feng Kai and Wang Ling, "The Free Vibration Characteristics of Variable Cross-Section Beams under Different Profiles," Mech. Solids. 59 (4), 2617-2627 (2024)
Year 2024 Volume 59 Number 4 Pages 2617-2627
DOI 10.1134/S0025654424604269
Title The Free Vibration Characteristics of Variable Cross-Section Beams under Different Profiles
Author(s) Feng Kai (School of Architecture and Civil Engineering, Xihua University, Chengdu, 610039 China)
Wang Ling (School of Architecture and Civil Engineering, Xihua University, Chengdu, 610039 China, wling0921@sina.com)
Abstract Based on Euler beam theory and Hamilton’s principle, the free vibration control equation for the variable cross-section beam was established. Galerkin discretization and eigenvalue methods were used to solve the natural frequencies of beams under simply supported-simply supported (SS) and simply-clamped supported (SC) boundary conditions. The vibration characteristics of beams with annular, rectangular frame and rectangular cross-section at different cross-sectional parameters (taper, thickness, and aspect ratio) are explored. The calculation example shows that the natural frequency of the beam is closely related to changes in taper. Especially for rectangular cross-section, the change in taper in the height direction of the beam has a large effect on the frequency, while the change in taper in the width direction has a smaller effect. Increasing the outer thickness of the annular cross-section beam has a different effect on the beam’s natural frequency than the inner thickness, while increasing the thickness of the rectangular frame cross-section beams will result in a decrease in the natural frequency of the beams. Increasing the aspect ratio of a rectangular variable cross-section section beam increases the natural frequency of the beam. Under the same cross-sectional area, the rectangular frame cross-section beam frequencies are higher than other cross-section beams.
Keywords Variable cross-section beam, Free vibration, Different cross-sectional shapes, Natural frequency
Received 11 June 2024Revised 26 July 2024Accepted 06 September 2024
Link to Fulltext
<< Previous article | Volume 59, Issue 4 / 2024 | Next article >>
Orphus SystemIf you find a misprint on a webpage, please help us correct it promptly - just highlight and press Ctrl+Enter

101 Vernadsky Avenue, Bldg 1, Room 246, 119526 Moscow, Russia (+7 495) 434-3538 mechsol@ipmnet.ru https://mtt.ipmnet.ru
Founders: Russian Academy of Sciences, Ishlinsky Institute for Problems in Mechanics RAS
© Mechanics of Solids
webmaster
Rambler's Top100