| | Mechanics of Solids A Journal of Russian Academy of Sciences | | Founded
in January 1966
Issued 6 times a year
Print ISSN 0025-6544 Online ISSN 1934-7936 |
Archive of Issues
Total articles in the database: | | 12854 |
In Russian (Èçâ. ÐÀÍ. ÌÒÒ): | | 8044
|
In English (Mech. Solids): | | 4810 |
|
<< Previous article | Volume 50, Issue 6 / 2015 | Next article >> |
A.A. Atai, M. Panahiazar, and R. Eghtefari, "Limit Load Analysis of a Spring-Supported Shallow Arch of Variable Thickness Given by a Power-Law, Exponential, or Logarithmic Formula," Mech. Solids. 50 (6), 676-686 (2015) |
Year |
2015 |
Volume |
50 |
Number |
6 |
Pages |
676-686 |
DOI |
10.3103/S0025654415060084 |
Title |
Limit Load Analysis of a Spring-Supported Shallow Arch of Variable Thickness Given by a Power-Law, Exponential, or Logarithmic Formula |
Author(s) |
A.A. Atai (Department of Mechanical Engineering, Islamic Azad University, Karaj Branch, Iran, aaatai@gmail.com)
M. Panahiazar (Department of Mechanical Engineering, Islamic Azad University, Karaj Branch, Iran)
R. Eghtefari (Department of Mechanical Engineering, Islamic Azad University, Karaj Branch, Iran) |
Abstract |
Thin shallow arches may become unstable under transverse loading as the built-up internal compressive forces reach a limiting value beyond which the structure undergoes a sudden large displacement towards a new stable configuration. This phenomenon could be both desirable (in toggle switches) and disastrous (collapse of a dome or truss). Hence, it is important to carry out the so-called snap- or limit-load analysis to reveal the factors influence the phenomenon and to give guidelines in designing structures to behave favorably. Although energy methods are a common means of this analysis, the phenomenon could also be analyzed by considering the equations governing the displacement of the arch and by monitoring the load-displacement characteristic of the structure until it reaches the limit point. This is the procedure adopted here. Researches on the subject mostly consider constant thickness arches with common pin-ended or fixed supports. Here the thickness is varied along the arch in three forms: power-law, exponential, and logarithmic. The supports are considered to be nonrigid fixed; i.e., pinned ends are equipped with torsional springs with constant stiffness. By changing these stiffnesses, various combinations of pinned and/or fixed states, or an intermediate state at each end could be developed. By considering the analytical solution for the transverse displacement for the general power-law case, the limit-load is obtained by numerical solution of the limit-load condition, which is a highly complicated function of the derived displacement field. Several parameter studies, such as that of the effects of shallowness and slenderness of arch and spring stiffnesses on the critical load, are carried out. The results are verified by those of simpler cases available in the literature, as well as those from a finite-element approach. |
Keywords |
limit load, shallow arch, nonrigid fixed support, variable thickness, power-law, spring support |
References |
1. | S. P. Timoshenko,
"Buckling of Curved Bars with Small Curvature,"
J. Appl. Mech. (ASME)
2 (1), 17-20 (1935). |
2. | C. B. Biezeno,
"Das Durchschlagen eines schwach gekriimmten Stabes,"
ZAMM
18, 21-29 (1938). |
3. | K. Marguerre,
"Die Durchschlagskraft eines schwach gekrummten Balken,"
Sitz. Berlin Math. Ges.
37, 92-108 (1938). |
4. | Y. C. Fung and A. Kaplan,
Buckling of Low Arches of Curved Beams of Small Curvature. NACA TN 2840
(1952). |
5. | G. J. Simitses and I. H. Rapp, "Snapping of Low Arches with
NonUniform Stiffness," Engng Mech. (ASCE) 103 (1), 51-65
(1977). |
6. | A. A. Atai, M. H. Naei, and R. Eghtefari,
"A Mixed Analytical-Numerical Investigation of
Snap-Through of Low Arches with a Power-Law Variable Thickness,"
J. Mech. Sci. Tech.
24 (11), 2247-2252 (2010). |
7. | R. H. Plaut,
"Buckling of Shallow Arches with Supports That Stiffen when Compressed,"
Engng Mech. (ASCE)
116 (4), 973-976 (1990). |
8. | Y. L. Pi, M. A. Bradford, and F. Tin-Loi,
"Nonlinear Analysis and Buckling of Elastically Supported Circular Shallow Arches,"
Int. J. Solids Struct.
44, 2401-2425 (2007). |
9. | Y. L. Pi, M. A. Bradford, and F. Tin-Loi, "NonLinear In-Plane
Buckling of Rotationally Restrained Shallow Arches under a Central
Concentrated Load," Int. J. NonLin. Mech. 43, 1-17
(2008). |
10. | Y. L. Pi and M. A. Bradford, "NonLinear In-Plane Postbuckling of
Arches with Rotational End Restraints under Uniform Radial
Loading," Int. J. NonLin. Mech. 44, 975-989 (2009). |
11. | J. Cai and J. Feng,
"Buckling of Parabolic Shallow Arches when Support Stiffens under Compression,"
Mech. Res. Communicat.
37, 467-471 (2010). |
12. | Z. P. Bazant and L. Cedolin,
Stability of Structures
(Dover Publications Inc., New York, 2003). |
13. | R. Eghtefari,
Analysis of snap-through in variable thickness arches. M.Sc. Thesis
(Islamic Azad University, Karaj Branch, 2009). |
14. | B. G. Korenev,
Bessel Functions and their Applications
(Taylor & Francis, London, 2002). |
15. | A. D. Polyanin and V. F. Zaitsev,
Handbook of Exact Solutions for Ordinary Differential Equations
(Chapman & Hall/CRC Press, Boca Raton, 2003). |
|
Received |
18 May 2012 |
Link to Fulltext |
|
<< Previous article | Volume 50, Issue 6 / 2015 | Next article >> |
|
If you find a misprint on a webpage, please help us correct it promptly - just highlight and press Ctrl+Enter
|
|