Mechanics of Solids (about journal) Mechanics of Solids
A Journal of Russian Academy of Sciences
 Founded
in January 1966
Issued 6 times a year
Print ISSN 0025-6544
Online ISSN 1934-7936

Russian Russian English English About Journal | Issues | Guidelines | Editorial Board | Contact Us
 


IssuesArchive of Issues2023-5pp.1821-1827

Archive of Issues

Total articles in the database: 11262
In Russian (Èçâ. ÐÀÍ. ÌÒÒ): 8011
In English (Mech. Solids): 3251

<< Previous article | Volume 58, Issue 5 / 2023 | Next article >>
K. Kamran and M.A. Iqbal, "Influence of Volume of Air on the Muzzle Velocity of the Projectile," Mech. Solids. 58 (5), 1821-1827 (2023)
Year 2023 Volume 58 Number 5 Pages 1821-1827
DOI 10.3103/S002565442360109X
Title Influence of Volume of Air on the Muzzle Velocity of the Projectile
Author(s) K. Kamran (Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkeem 247667, India, kmrn890@gmail.com)
M.A. Iqbal (Department of Civil Engineering, Indian Institute of Technology Roorkee, Roorkeem 247667, India, ashraf.iqbal@ce.iitr.ac.in)
Abstract In the present study, the ogival-nosed hardened steel projectile having a mass of 0.4 kg, diameter of 19 mm, calibre radius head (CRH) of 3, and length of 200 mm was used to obtain their muzzle velocity with respect to their corresponding air pressure. The two pressure vessels with varying storage capacities (20 and 90 liters) connected with the same actuator (having an opening diameter of 25.4 mm) were used to describe their influence on the muzzle velocity of the projectile. Also, the two actuators with varying opening diameters (25.4 and 50.8 mm) connected with the same pressure vessel (having a storage capacity of 90 liter) were considered to describe the influence of releasing a large volume of air on the muzzle velocity of the projectile. Based on these variations, three testing configurations such as (1) the pressure vessel with a storage capacity of 20 liter connected with the actuator having an opening diameter of 25.4 mm will be described as Case 1, (2) the actuators with an opening diameter of 25.4 connected with the pressure vessel having a storage capacity of 90 liter will be described as Case 2, and (3) the actuators with an opening diameter of 50.8 connected with the pressure vessel having a storage capacity of 90 liter will be described as Case 3, were made. Based on the experimental results, the muzzle velocities of the projectile obtained for Case 3 were found to be higher than that obtained for Case 2 at pressures varying from 10 to 55 kg/cm2. Also, the actuator having a double opening diameter (50.8 mm) was responsible for increasing the muzzle velocity of the projectile to a maximum of 58% due to releasing a larger volume of air than that for Case 2. The muzzle velocity obtained for Case 2 was equal to that obtained for Case 1 at low pressure (10 kg/cm2). However, the muzzle velocity obtained for Case 2 was higher than that obtained for Case 1 at pressures varying from 15 to 55 kg/cm2 and increased to a maximum of 6%, describing the influence of using the pressure vessel having 4.5 times higher storage capacity than that used for Case 1. Hence, using the actuator with a large opening diameter was more effective for increasing the muzzle velocity of the projectile than the pressure vessel with a large storage capacity.
Keywords volume of air, muzzle velocity, ogive-nosed projectile, pressure vessel, actuator
Received 28 June 2023Revised 08 August 2023Accepted 10 August 2023
Link to Fulltext
<< Previous article | Volume 58, Issue 5 / 2023 | Next article >>
Orphus SystemIf you find a misprint on a webpage, please help us correct it promptly - just highlight and press Ctrl+Enter

101 Vernadsky Avenue, Bldg 1, Room 246, 119526 Moscow, Russia (+7 495) 434-3538 mechsol@ipmnet.ru https://mtt.ipmnet.ru
Founders: Russian Academy of Sciences, Ishlinsky Institute for Problems in Mechanics RAS
© Mechanics of Solids
webmaster
Rambler's Top100