Mechanics of Solids (about journal) Mechanics of Solids
A Journal of Russian Academy of Sciences
 Founded
in January 1966
Issued 6 times a year
Print ISSN 0025-6544
Online ISSN 1934-7936

Russian Russian English English About Journal | Issues | Guidelines | Editorial Board | Contact Us
 


IssuesArchive of Issues2019-3pp.448-460

Archive of Issues

Total articles in the database: 11223
In Russian (Èçâ. ÐÀÍ. ÌÒÒ): 8011
In English (Mech. Solids): 3212

<< Previous article | Volume 54, Issue 3 / 2019 | Next article >>
V.N. Bakulin, "Layer-by-Layer Analysis of the Stress-Strain State of Three-Layer Shells with Cutouts," Mech. Solids. 54 (3), 448-460 (2019)
Year 2019 Volume 54 Number 3 Pages 448-460
DOI 10.3103/S0025654419020092
Title Layer-by-Layer Analysis of the Stress-Strain State of Three-Layer Shells with Cutouts
Author(s) V.N. Bakulin (Institute of Applied Mechanics of the Russian Academy of Sciences, Leningradskii pr. 7, Moscow, 125040 Russia, vbak@yandex.ru)
Abstract The stress-strain state (SSS) of three-layer shells with cutouts has not been sufficiently studied, which is one of the reasons limiting their use in modern designs. Based on the block finite element approach, a refined model of the layer-by-layer analysis of the SSS of irregular three-layer shells is developed. The considered approach allows us to fairly accurately model the heterogeneity of the package of layers and the aggregate layer, the conditions for fixing the layers and the application of loads to them, to apply various models to study the bearing layers and the aggregate. Using approximations of the finite elements (FE) of the bearing layers, approximating functions of the displacements of the three-dimensional FE of the aggregate are constructed and based on them, a model is developed for the accurate calculation of the SSS, allowing to take into account the change in the characteristics of the material and the stress state, including the radial coordinate in the aggregate layer. The study of the stress-strain state in the layers of three-layer shells with cuts, including through-holes, was carried out in a refined formulation. A significant reduction and smoothing of the stresses of the edge effect in the layers of three-layer shells with non-through cutouts compared with through cut due to the redistribution of the load was revealed, since a significant part of it is taken over by layers with undisturbed continuity.
Keywords three-layer shells, layer-by-layer analysis, block finite element approach, finite element models, approximating functions, through and non-through cutouts, load-bearing layers, aggregate layer, stress-strain state
Received 05 November 2017
Link to Fulltext
<< Previous article | Volume 54, Issue 3 / 2019 | Next article >>
Orphus SystemIf you find a misprint on a webpage, please help us correct it promptly - just highlight and press Ctrl+Enter

101 Vernadsky Avenue, Bldg 1, Room 246, 119526 Moscow, Russia (+7 495) 434-3538 mechsol@ipmnet.ru https://mtt.ipmnet.ru
Founders: Russian Academy of Sciences, Ishlinsky Institute for Problems in Mechanics RAS
© Mechanics of Solids
webmaster
Rambler's Top100